Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam
may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
Tray 1
Paper type and weight Paper size Paper capacity
52–300 g/m
2
(14 lb. Bond–
110 lb. Cover)
Thin Paper–Thick Paper 4
A4
8
1
/
2
× 11
550 sheets
52–300 g/m
2
(14 lb. Bond–
110 lb. Cover)
Thin Paper–Thick Paper 4
*1
A5 , B5 JIS , 8
1
/
2
× 11
A4 , A5 , B5 JIS
550 sheets
*1
To load paper any of the sizes specified above, contact your service representative.
9. Adding Paper and Toner
144
To Next Page
Loading...
