Message Causes Solutions
"Classification Code is
incorrect."
The classification code is
not supported with the
printer driver.
Select [Optional] for classification code.
For details about how to specify
classification code settings, see
"Configuring Classification Codes", Print
.
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select the proper paper size for the
duplex function. For details about
paper, see "Specifications for the
Main Unit", Maintenance and
Specifications .
• Change the setting for "Apply
Duplex" in [System Settings] to
enable duplex printing for the paper
tray. For details about setting "Apply
Duplex", see "Tray Paper Settings",
Connecting the Machine/ System
Settings .
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
"Exceeded the maximum
number of multi-sheet fold
(Half Fold)."
The maximum number of
multi-sheet folds (Half Fold)
was exceeded.
For details about the maximum number of
multi-sheet folds (Half Fold), see "Fold",
Print .
"Output tray has been
changed."
The output tray was
changed because the
paper size of the specified
output tray is limited.
Specify the proper output tray.
Messages Displayed When Using the Printer Function
193
To Next Page
Loading...
Need help?
General
