Ricoh MP C4503 Series User Manual

3. Make sure [Immed. TX] is not highlighted.
4. Place the original into the ADF.
5. Make the scan settings such as scan size and resolution.
6. Configure the transmission settings such as [TX Mode] as necessary.
7. Specify a destination.
You can enter the destination's number or address directly or select from the Address Book by
pressing the destination key.
If you make a mistake, press the [Clear] key, and then enter again.
8. When sending the same original to several destinations (broadcasting), specify the next
destination.
4. Fax
84

Ricoh MP C4503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Standard Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Print Technology	Laser
Fax Speed	33.6 Kbps
Print Speed	45 ppm
Paper Capacity	4, 700 sheets
Connectivity	USB, Ethernet, Wi-Fi
Scan Resolution	600 dpi
Memory	2 GB
Control Panel	9-inch color touchscreen
Operating System Compatibility	Windows, Mac, Linux