If multiple trays contain valid paper, the first tray the machine finds will be used for printing; when
that tray runs out of paper, the machine automatically switches to the next tray to continue printing.
If Tray 2 is not installed, [Tray 2] does not appear.
• Printer
If automatic tray selection is specified for the print job and both tray 1 and tray 2 contain
paper that matches the print job, the machine starts to print from the specified tray.
• Tray 1
• Tray 2
Default: [Tray 1]
Tray1 Priority
Specifies how print jobs using the Tray 1 are handled.
Default: [Driver/Command]
• Machine Setting(s)
The paper settings configured on the machine's control panel are applied to all print jobs. An
error occurs when the paper settings specified by the printer driver or the print command do
not match the machine's settings.
• Driver/Command
When the paper tray is specified for a print job, the paper settings specified in the printer
driver or in the print command are applied, regardless of the machine's settings.
Size Mismatch Detection
Sets the machine to report an error if the paper size does not match the print job's settings.
• Off
• On
Default: [On]
Tray Paper Settings
83
To Next Page
Loading...
