1
Introduction
20
When shooting with the viewfinder, information appears in the
viewfinder.
t Memo
• The information is displayed in the viewfinder when 0
is pressed halfway, or during the meter operating time
(default setting: 10 sec.). You can change the meter
operating time in [3 Meter Operating Time] of the E1 menu.
(p.35)
• The AF point in use for autofocus is emphasized when
0 is pressed halfway.
• You can adjust the viewfinder
image sharpness using the diopter
adjustment dial.
• The display of Grid Display,
Electronic Level, AF Frame, Spot
Metering Frame, and AF Points
can be turned on or off in
[Viewfinder Overlay] of the A5 menu. (p.27)
• The viewfinder is illuminated when focusing the subject or
changing the focusing area in a dark place. To change the
illumination method, set in [9 Viewfinder Light] of the E2
menu. (p.35)
Viewfinder
1 Cropping frame (p.48) 10 Shutter speed/
Remaining processing
time for Slow Shutter
Speed NR (p.50)/AF
Mode (p.58)/Number of
shots for Bracketing
(p.65)
2 Spot metering frame
(p.56)
3 AF point (p.58)
4 Grid Display
5 AF frame (p.45)
6 Electronic Level
(vertical tilt) (p.21)
11 Aperture value/Bracket
value (p.65)
7 Electronic Level
(horizontal tilt) (p.21) 12 Focus indicator
8 Flash indicator 13 EV bar scale
9 Focus Method (p.57) 14 ISO/ISO AUTO
5
4
8
23
2422212019181716
10 14 15
2
1
6
7
3
9 11 12 13
15 Sensitivity (p.55)/
Exposure
compensation value/
Image storage capacity/
AF Active Area (p.58)
16 Change AF Point (p.59)
17 Operation controls
disabled (p.46)
18 AE Lock
19 AE Metering (p.56)
L Auto (33 AF
Points)
20 Multi-exposure (p.67)
21 Shake Reduction (p.75)
M Zone Select 22 Flash Exposure
Compensation (p.72)
N Select
O Expanded Area
AF (S)
23 EV Compensation
(p.52)/Bracketing (p.65)
P Expanded Area
AF (M)
24 File Format (p.48)
Q Expanded Area
AF (L)
R Spot
To Next Page
Loading...
