2
Getting Started
45
The selected capture mode and
functions assigned to buttons/
dials are displayed on the
monitor (Guide Display).
y Guide Display settings
(p.28)
6 Look through the viewfinder to view the subject.
When using a zoom lens, turn the zoom ring to the right or
left to change the angle of view.
7 Position the subject inside
the AF frame and press
0 halfway.
The focus indicator (P) appears
and you will hear a beep when
the subject comes into focus.
y Sound Effects settings
(p.32)
8 Press 0 fully.
The captured image is displayed on the monitor (Instant
Review).
Available operations during Instant Review
1 Press K in Step 6 on
“Shooting with the
Viewfinder” (p.45).
The Live View image is displayed
on the monitor.
2 Position the subject inside
the AF frame on the
monitor and press 0
halfway.
The AF frame turns green and
you will hear a beep when the
subject comes into focus.
Available operations
Subsequent steps are the same as shooting with the
viewfinder.
L
Deletes the image.
R to the right Magnifies the image.
H
Saves the RAW data (only
when a JPEG image was
taken and the data remains in
the buffer).
1/
250
1600
F
5.6
Scene Analyze Auto
Shooting while Viewing the Live View Image
E
Magnifies the image.
Use R to change the magnification (up to
16×).
Use ABCD to change the area to display.
Press M to return the display area to the
center.
Press E to return to 1× image display.
K
Exits shooting with Live View.
1/
2000
F2.8
1600
9999
To Next Page
Loading...
