4
Playback
88
Copies images between memory cards in the SD1 and the SD2
slots.
1 Select an image saved on the memory card
which the images are to be copied from, and
display it in single image display.
2 Select [Image Copy] in the playback mode
palette.
3 Select [Select image(s)] or [Select a folder] and
press E.
4 Select image(s) or a folder.
y How to select image(s) (p.84)
5 Press G.
The save confirmation screen appears.
6 Select the location to save the image(s) or folder
and press E.
u Caution
• Only JPEG images captured with this camera can be resized
or cropped.
• Images already resized or cropped to the minimum file size
cannot be processed.
Changes the number of recorded pixels of the selected image,
and saves it as a new file.
1 Display the image to edit in single image
display.
2 Select [Resize] in the playback mode palette.
The screen to select the number of recorded pixels
appears.
3 Use CD to select the
number of recorded pixels
and press E.
You can select an image size
smaller than that of the original
image.
The save confirmation screen appears.
4 Select [Save to SD1] or [Save to SD2] and press
E.
Editing and Processing Images
Copying an Image
Changing the Image Size
Changing the Number of Recorded Pixels
Cancel
OK
To Next Page
Loading...
