1
25
Introduction
Menu List
Rec. Mode Menus
Item Function Default Setting Page
A1
Phase
Detection
AF
AF Mode
*1
Selects the autofocus method for shooting with the viewfinder.
x p.58
AF Active Area
*1
Selects the area to adjust the focus for shooting with the
viewfinder.
Auto
(33 AF Points)
p.58
AF.S Setting
Sets the action priority for when the autofocus mode is set to
x and 0 is fully pressed.
Focus-priority p.57
1st Frame Action in
AF.C
Sets the action priority for the first frame when the autofocus
mode is set to y and 0 is fully pressed.
Auto p.57
Action in AF.C Cont.
Sets the action priority during Continuous Shooting when the
autofocus mode is set to y.
Auto p.57
Hold AF Status
Maintains the focus for a certain amount of time when the
subject happens to move out of the selected focusing area
after being focused.
Off p.57
Contrast
Detection
AF
Contrast AF
*1
Sets the autofocus mode for shooting with Live View. Face Detection p.60
Focus Peaking
*1
Emphasizes the outline of the subject in focus and makes it
easier to check the focus.
Off p.59
Contrast AF Options Sets the action priority for when 0 is fully pressed. Focus-priority p.59
AF Assist Light
*1
Illuminates the assist light when autofocusing in dark locations.
On p.58
AE Metering
*1
Selects the part of the sensor to use for measuring brightness
and determining the exposure.
Multi-segment p.56
ISO AUTO
Setting
ISO Range
(Maximum)
*1
Sets the upper limit value for ISO AUTO. ISO 6400
p.55
ISO Range
(Minimum)
Sets the lower limit value for ISO AUTO. ISO 100
AUTO ISO
Parameters
Specifies the manner in which the sensitivity is increased. Std.
Flash Mode
*1
Sets the flash mode.
Flash On or
Auto Flash
Discharge
p.71
Program Line
*1
Selects the Program Line setting. Normal p.51
To Next Page
Loading...
