3
Shooting
69
t Memo
•
For 
q
 and 
U
, 
a new folder is created and the captured 
images are saved there.
• The shortest time that can be set for [Interval] is 10 seconds 
when [Digital Filter], [Clarity], or [Skin Tone] is set, and 20 
seconds when [HDR Capture] is set.
• The second and later exposures start at the intervals set in 
[Interval]. If the exposure time is longer than the time set in 
[Interval], some of the pictures that are supposed to be taken 
at the set intervals are not actually taken. For example, if the 
time set in [Interval] is 2 seconds and the exposure time is 3 
seconds, the first exposure has not yet finished at the time the 
second exposure is supposed to be started (2 seconds after 
shooting has started), and so the second picture is not taken. 
As a result, Interval Shooting ends before the specified 
number of shots are taken. In such cases, you can set 
[Standby Interval] in [13 Interval Shooting Options] of the E2 
menu so that every picture is taken at the set intervals after 
each exposure ends. The screen displayed in Step 4 varies 
depending on the [13 Interval Shooting Options] setting.
•
For 
q
, 
U
, 
V
, and 
w
, t the focus position used when the 
first picture is taken is locked. When performing autofocus for 
each exposure, set [14 AF in Interval Shooting] to [Adjusts 
focus for each shot] in the 
E
2 menu.
•
For 
U
 and 
w
, set the camera on a fixed support such as a 
tripod during shooting.
•
For 
V
 and 
w
, [Shake Reduction] of the 
A
4 menu is fixed to 
[Off].
•
For 
w
, the camera operates in 
L
 mode regardless of the 
mode dial setting.
1 Press C in standby mode.
The White Balance setting screen appears.
Turn the main switch to U to use Digital Preview when 
shooting with the viewfinder.
2 Select the desired white 
balance setting.
For k, o, and p, turn R to 
select the type of white balance.
Available operations when shooting with the 
viewfinder
Proceed to Step 5 if you do not need to fine-tune the white 
balance.
Setting the White Balance
g
Auto White Balance
u
Multi Auto White Balance
h
Daylight
i
Shade
j
Cloudy
k
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
l
Tungsten
n
Color Temperature Enhancement
o
Manual White Balance 1 to 3
p
Color Temperature 1 to 3
H
Saves the preview image (only when the image 
can be saved).
WB
±
Auto White Balance
Cancel
Check
OK