1
36
Introduction
E3
19 Enable/Disable Control
Enables or disables operation of the selected group of buttons and
dials.
Type1 p.46
20 Change AF Point Button
Selects the c operation when the focusing area selection mode
is set to one of some select-type options.
Type1 p.59
21 Auto SR Off
Automatically turns off the Shake Reduction function when the
drive mode is set to [Self-timer] or [Remote Control].
Enable Auto
SR Off
p.63
E4
22 Save Rotation Info Saves rotation information when shooting. On p.86
23 Save Menu Location
Saves the last menu tab displayed on the monitor and displays it
again the next time F is pressed.
Reset Menu
Location
p.24
24 Catch-in Focus
Enables Catch-in Focus shooting when a manual focus lens is attached.
The shutter is released automatically when the subject comes into focus.
Off p.111
25 AF Fine Adjustment
Allows you to precisely fine-tune your lenses with the camera’s
autofocus system.
Off p.61
26 Using Aperture Ring
Enables the shutter to release when the lens aperture ring is set
to a position other than 9 (Auto).
Disable p.111
Reset Custom Functions
Resets the setting values of the Custom Setting menu items to the
defaults.
——
Item Function Default Setting Page
To Next Page
Loading...
