3
Shooting
73
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
The adjustment values for parameters are displayed.
6 Press E.
The camera returns to standby mode.
u Caution
•In R mode, [Custom Image] is fixed to [Auto Select].
• The Digital Preview operation in Step 2 is disabled when the
drive mode is set to [Mirror Lock-up Shooting], [Multi-
exposure], or [Interval Shooting].
The outcome of Cross Processing varies each time a picture is
taken. If a cross processed image that you like is taken, you can
save the Cross Processing settings used in the image so that
you can repeatedly use the same settings.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Select [Save Cross Processing] and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select the “Favorite” number 1, 2, or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.72), and selecting one of the Favorite settings 1 to 3 for the
parameter.
AB
Selects a parameter.
CD
Adjusts the value.
Q
Switches between [Contrast], [Highlight
Adjustment], and [Shadow Adjustment].
R
Switches between [Sharpness], [Fine
Sharpness], and [Extra Sharpness].
(Not available in C mode.)
M
Resets the adjustment value to the default
setting.
Saturation
Cancel
OK
Reset
Saving the Cross Processing Settings of a
Captured Image
100-0001
Saves this image's Cross
Processing settings
Save as Favorite 1
Save as Favorite 2
Save as Favorite 3
Cancel
OK
To Next Page
Loading...
