6
Settings
101
For each exposure mode, you can set the functions for when
Q and R are turned and M is pressed.
The function can be set for exposure modes other than M
mode.
1 Select [E-Dial Programming] of [Button
Customization] in A5 or C2 menu and press
D.
The [E-Dial Programming] screen appears.
2 Select an exposure mode and press D.
The screen for the selected exposure mode appears.
3 Press D and use AB to
select the combination of
functions for when Q
and R are turned and M
is pressed.
4 Press E.
5 Press F.
The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 5.
6 Press F twice.
t Memo
• If you select [Rotation Direction] in Step 2, you can reverse
the effect obtained by turning Q or R.
• You can check the functions assigned to Q, R, and M
while the Guide Display (p.45) is shown.
Setting the E-dial Operation
I
Change Shutter Speed
J
Change Aperture Value
ISO
Change Sensitivity
e
EV Compensation
XG
Return to G Mode
GSHIFT
Program Shift
GLINE
Program Line
-- Not available
Exposure ModeExposure Mode
CancelCancel
OKOK
To Next Page
Loading...
