5
Sharing
94
Connect the camera to a computer using a USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1 Turn the computer on.
2 Turn the camera off.
3 Open the terminal cover of
the camera, and connect
the USB cable to the USB
terminal.
4 Connect the USB cable to the USB port of the
computer.
5 Turn the camera on.
The camera is recognized as a removable disk.
6 Save the captured images to the computer.
7 Disconnect the camera from the computer.
u Caution
• The camera cannot be operated while it is connected to a
computer. To operate the camera, terminate the USB
connection on the computer first, then turn off the camera and
remove the USB cable.
• If the “KF” dialog appears on the computer screen in Step 5,
select [Open folder to view files] and click the OK button.
t Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.132) for system requirements to
connect the camera to a computer with a commercially
available USB cable and to use the software.
• The USB connection mode when connecting the camera to a
computer can be set in [USB Connection] of the D3 menu.
Normally, you do not need to change the default setting
([MSC]).
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended. (p.39)
Copying an Image to a Computer
To Next Page
Loading...
