Ricoh PENTAX KF - Adjusting the White Balance Manually

3
Shooting
74
You can measure the white balance at a selected location.
1 Select o in Step 2 of “Setting the White
Balance” (p.72).
2 Use R to select 1 to 3.
1 to 3 are the locati on s whe re you
can store three different manual
white balance settings.
3 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press 0 fully.
The captured image is displayed.
4 Use ABCD to specify
the measuring area.
Press M to return the measuring
area to the center.
5 Press E.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance.
t Memo
• You can copy the white balance settings of a captured image
and save them as o1 to o3 in [Save as Manual WB] of the
playback mode palette. (p.83)
Adjusting the White Balance Manually
WB ±
WB ±
Manual White Balance
Manual White Balance
Cancel
Cancel
Check
Check
Adjust
Adjust
OK
OK
Cancel
Cancel
OK
OK