3
Shooting
63
4 Select the desired AF
point.
Available operations
t Memo
• You can also set the camera so that switching to the AF point
change mode by pressing and holding E can be operated
with X or Y. (p.98)
• You can select the button operation when changing the
focusing area in [18 4-way Controller Settings] of the E3
menu.
The autofocus operation when
shooting with Live View can be set in
[AF with Live View] of the A1 and
C1 menus.
When [Focus Peaking] is set to [On], the outline of the subject
in focus is emphasized, and this makes it easier to check the
focus. This function works in both v and w modes.
The menu item [AF Mode] in [AF with Live View] of the C1 can
be changed to y only when a compatible lens is attached
to the camera.
1 Select an autofocus mode in [AF Mode] on the
[AF with Live View] screen.
Select from x or y.
2 Press E.
ABCD
Changes the AF point.
E
Returns the AF point to the
center.
Press and hold E Switches the function of the
arrow keys (ABCD) to the
AF point change mode or the
direct key operation mode.
Type1
Switches the operation of the arrow keys
(ABCD) to the AF point change mode or the
direct key operation mode.
Type2
Prioritizes the AF point change mode in standby
mode.
Setting the Autofocus when
Shooting with Live View
A1/C1
AF Active Area e, f, 0, h, i
Focus Peaking On, Off
AF.S Setting Focus-priority, Release-priority
AF Mode C1
AF Active Area
Focus Peaking
AF.S Setting
AF with Live View
To Next Page
Loading...
