Ricoh PENTAX KF - Operating Controls

1
Introduction
10
1 EV Compensation button (J)
Press to change the exposure compensation value. (p.58)
In playback mode, press to save the last JPEG image taken
also in RAW format. (p.48)
2 Green button (M)
Resets the value being adjusted.
3 Shutter release button (0)
Press to capture images. (p.46)
In playback mode, press halfway to switch to capture mode.
4 Main switch
Turns the power on or off, or switches to C (movie) mode.
(p.42, p.54)
When the camera is turned on, it enters A (still picture)
mode and the indicator lamp lights green. When the switch
is turned to C, the camera enters C mode and the lamp
lights red.
5 Front e-dial (Q)
Changes the values for camera settings such as exposure.
(p.52)
You can change the menu category when a menu screen is
displayed. (p.22)
In playback mode, use this to select a different image.
6 Flash pop-up button (1)
Press to pop up the built-in flash. (p.59)
7 RAW/Fx1 button (X)
You can assign a function to this button. (p.98)
By default, the function that temporarily changes the file
format (One Push File Format) is assigned.
8 Focus mode switch
Changes the focus method. (p.61)
Operating Controls
1
0
8
c
e
b
6
4
3
5
9
f
g
h
2
7
a
d