3
Shooting
58
The compensation value can be set between -5 and +5 EV (-2
and +2 EV in C mode).
1 Press J, and then turn
R.
e and the compensation value
are displayed on the status
screen, Live View screen, and in
the viewfinder during adjustment.
Available operations
t Memo
• Bracketing shooting enables you to take pictures while
automatically changing exposure. (p.68)
Choose the part of the sensor to use for measuring brightness
and determining the exposure in [AE Metering] of the A1 and
C1 menus.
t Memo
• In [5 Link AE and AF Point] of the E1 menu, the metering
point and the AF point can be linked.
EV Compensation
J
Starts/ends adjusting the compensation value.
M
Resets the adjustment value to the default setting.
99 9 9999999
1/1/
25 0250
FF
5.65.6
16 001600
AE Metering
A1/C1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit conditions, this mode automatically
adjusts the exposure.
B
Center-
weighted
Meters the brightness with an emphasis on the
center of the sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even in
backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
To Next Page
Loading...
