3
Shooting
76
Available operations when shooting with the viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press F.
The screen of Step 2 reappears.
The adjustment values for parameters are displayed.
6 Press F twice.
The camera returns to standby mode.
u Caution
•In R mode, the image finishing tone is fixed to [Auto
Select].
• The Digital Preview operation in Step 2 is disabled when the
drive mode is set to [Mirror Lock-up Shooting], [Multi-
exposure], or [Interval Shooting].
When [Cross Processing] is set to [Random], the outcome
varies each time a picture is taken. If you take a cross
processed image that you like, you can save the Cross
Processing settings used in the image so that you can
repeatedly use the same settings.
1 Press B in single image display of playback
mode.
The playback mode palette appears.
2 Select j and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
X
Uses Digital Preview to preview the background
image with the selected setting applied.
J
Saves the preview image (only when the image
can be saved).
AB
Selects a parameter.
CD
Adjusts the value.
Q
Switches between [Contrast], [Highlight
Adjustment], and [Shadow Adjustment].
R
Switches between [Sharpness], [Fine
Sharpness], and [Extra Sharpness]. (Not
available in C mode.)
M
Resets the adjustment value to the default
setting.
Saturation
Cancel
OK
Reset
Saving the Cross Processing Settings of a
Captured Image
To Next Page
Loading...
