Ricoh PENTAX KF - Changing the Settings; Customizing Camera Controls and Settings

5
Sharing
96
1 Select [Wi-Fi] in D3 menu and press D.
The [Wi-Fi] screen appears.
2 Set [Action Mode] to [On].
Select [Off] to disable the Wi-Fi™
function.
3 Press F twice.
t Memo
• In Step 2, select [Communication Info] to check the SSID,
Password, and MAC Address of the wireless LAN. Or, select
[Reset Settings] to reset the settings to their default values.
1 Press and hold Y in
single image display of the
playback mode.
A beep sounds and [Wi-Fi
enabled] appears on the monitor.
Press and hold Y again to
disable the Wi-Fi™ function.
u Caution
• By default, you can turn the Wi-Fi™ function on and off by
pressing and holding Y. If the Y button function is changed
in [Button Customization] of the A5 menu, you cannot turn
the Wi-Fi™ function on and off with Y (p.98).
Setting from the Menus D3
Wi-Fi
Wi-Fi
Action Mode
Action Mode
Communication Info
Communication Info
Reset Settings
Reset Settings
Cancel
Cancel
OK
OK
Using the Y Button