6. Fasten the postcard side fences with the screws.
7. Align the end fence and side fences with the paper size to be loaded, and then load the
paper.
8. Carefully slide the paper tray fully in.
• Replace the postcard side fences after use.
Changing the Paper Size in the Two-tray Wide Large Capacity Tray
• Check that the paper edges are aligned with the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
Changing the Paper Size
105
To Next Page
Loading...
