2. Remove the stack of paper from the finisher shift tray.
3. Press the [Suspend / Resume] key to restart the print.
• You can suspend printing only when the finisher shift tray is selected as the output tray.
When using the Z-fold function
To use the Z-fold function, you must attach the Z-fold support tray.
Finisher SR5050 and Booklet Finisher SR5060
• Finisher shift tray
Attach the Z-fold support tray by inserting the two protrusions on its underside into the holes
on the finisher shift tray.
Multi-folding unit
1. Lift up and slide the Z-fold support tray for multi-folding unit to the right, and then set it in
place.
Guide to Functions of the Machine's Options
25
To Next Page
Loading...
