Changing the login password using the control panel
1. Press the [User Tools] key.
2.
Press [Login] twice.
3. Enter a Login User Name, and then press [OK].
4. Enter a Login Password, and then press [OK].
5. Press [Address Book Mangmnt].
6. Select the user.
7. Press [Auth. Info].
8. Press [Change] for [Login Password].
9. Enter a new login password, and then press [OK].
10. If a password reentry screen appears, enter the login password, and then press [OK].
11. Press [OK].
12. Press the [User Tools] key.
Changing the login password using Web Image Monitor
1. Open a web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
4. Enter the login user name and login password, and then click [Login].
5. Point to [Device Management], and then click [Address Book].
6. Select the user or group.
7. Click [Change].
8. Click [Change] next to [Login Password] in the [Authentication Information] area.
9. Enter the new password in the [New Password] box.
Logging In the Machine
51
To Next Page
Loading...
