• Check the paper edges are aligned at the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in the two-tray wide LCT by adjusting the positions of side
fence and end fence. For details, see page 105 "Changing the Paper Size in the Two-tray Wide
Large Capacity Tray".
• You can load envelopes in the two-tray wide LCT. When loading envelopes, place them in the
correct orientation. For details, see page 135 "Envelopes".
4. Paper Specifications and Adding Paper
90
To Next Page
Loading...
