Measure the length from the corners of the paper to the peaks of the arrows and from the peaks to
the peaks of the arrows, and then write the length in the box on the template. Perform these for both
sides of the paper.
1. The length from the peak of one arrow to the peak of another arrow
2. The length from the corner of the paper to the peak of the arrow
Entering the value
When you specify the lengths of the template after measuring them, the values to adjust the image
position are automatically calculated and applied.
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Press [CustomPaper Management].
4. Select the name of the paper that you want to register.
If the paper you want to select is not displayed, use [Jump to Row], or scroll through the screen until
the desired item is displayed.
5. Press .
6. Press [Advanced Settings].
Registering Custom Paper
61
To Next Page
Loading...
