Ricoh PRO C7210X

1.SC Codes
16
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
00
The scanner home position sensor does not go OFF.
Details:
Error detection timing
 During homing (when the machine is turned ON or when it returns from
energy save mode)
 During an automatic adjustment (when the machine is turned ON or when it
returns from energy save mode)
 During a scan from the ADF or exposure glass.
 Scanner motor driver defective
 Scanner motor defective
 Scanner HP sensor defective
 Harness defective
 Timing belt, pulley, wire, or carriage not installed correctly
 Cycle the machine off/on.
 Replace the scanner motor.
 Replace the HP sensor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC121-00
D
Scanner Home Position Error 2
The scanner home position sensor does not go ON.
Details:
Error detection timing
 During homing
 During an automatic adjustment
 During a scan from the ADF or exposure glass.
 Scanner motor driver defective
 Scanner motor defective
 Scanner HP sensor defective
 Harness defective
 Timing belt, pulley, wire, or carriage not installed correctly
 Cycle the machine off/on.
 Replace the scanner motor.
 Replace the HP sensor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC141-
00
D
Black level detection error (Front)
The black level cannot be adjusted when the initial adjustments of the CMOS