Load a stack of paper about 5–10 mm (0.2–0.4 inches) high.
Make sure the paper rest on top of the supporting plates on both sides.
When you load paper that is 204 mm (8.04 inches) or shorter, remove the supporting plates from
the bottom of the paper tray.
1. Supporting plates
Use the paper size indicators on the bottom of the paper tray to adjust the side fences the space
provided by the side fences is somewhat wider than the paper size. Load paper so that both sides
are on the auxiliary side fences.
Changing the Paper Size
111
To Next Page
Loading...
