Ricoh Pro C9200 - Page 148

Default: [Yes]
Duplex printing is automatically disabled if you select [Translucent Paper], [Carbonless
Paper], [Envelope], or [Tab Stock] for [Paper Type].
Paper Size
Auto Detect, A3 , A4 , A5 , A6 , B4 JIS , B5 JIS , B6 JIS ,
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
,
8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 ,
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 226 × 310mm , 310 × 432mm ,
4
1
/
5
× 5
1
/
2
, Custom Size
Default: [Auto Detect]
Specify the paper size with the number keys when you select [Custom Size]. The paper sizes
that can be used differ depending on the machine's configuration.
• When the banner sheet tray of multi bypass tray (Tray A) is not installed:
Vertical: 100.0–330.2 mm (3.94–13.00 inches), Horizontal: 139.7–487.7 mm (5.50–
19.20 inches)
• When the banner sheet tray of multi bypass tray (Tray A) is installed:
Vertical: 210.0–330.2 mm (8.27–13.00 inches), Horizontal: 139.7–700.0 mm (5.50–
27.55 inches)
For details about auto detectable paper sizes, see page 119 "Recommended Paper Sizes
and Types".
• The maximum weight of paper that can be loaded into the multi bypass tray (Tray A) is 220.0
g/m
2
(80 lb. Cover).
Interposer Upper and Lower Tray (when the interposer is installed)
This section explains the paper tray settings for the upper and lower trays of the interposer.
Paper Size
Auto Detect, A3 , A4 , A5 , B4 JIS , B5 JIS ,
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
,
8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 ,
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 226 × 310mm , 310 × 432mm ,
Custom Size
5. Paper Specifications and Adding Paper
146