CGH014
Slide the ring binder
tray fully in carefully.
Pull out the ring
binder tray.
Remove bound
booklets.
• Before pulling out the ring binder tray, make sure the machine is not in operation.
• When removing bound booklets from the ring binder tray, be careful not to catch the rings on
the machine.
Inserting pages into an existing ring bound booklet
• When binding paper manually with the ring opener, take care not to trap or injure fingers.
You can use the ring stand and ring opener to insert new pages into the existing ring bound
booklets. Use these devices when you need to insert covers, replace existing pages, or add new
pages.
1. Ring stand
2. Ring opener
1. Punch holes into the pages that you want to insert into the ring bound booklet.
5. Paper Specifications and Adding Paper
148
To Next Page
Loading...
