Setting Items Values
Adjust All
Adjust Image Density
Density Difference: Acr Fd
Density Difference: With Fd
Color Registration
Press [Execute].
• The machine executes automatic image quality adjustment after a set interval or after printing a
specified number of sheets. However, you can also manually initiate automatic image density
adjustment whenever you want.
0202 Maximum Image Density
Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment.
When the degree of coloration differs depending on the difference in the degree of pigmentation, adjust
the toner adhesion amount.
Press [ ] or [ ] to increase or decrease the toner adhesion amount.
If you change the setting value, [Adjust Image Density] is automatically performed before the machine
starts printing.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Black
Cyan
Magenta
Yellow
0 5 -5 1 -
• Increasing the toner adhesion might reduce fusibility, causing toner splatter or distorted text and
thin lines.
0203 Line Width
Adjust the intensity of the laser for rasterizing the image data.
Press [ ] or [ ] to increase or decrease the intensity.
6. Adjustment Settings for Operators
174
To Next Page
Loading...
