Ricoh Pro C9200 - Page 250

When Mc7 or Mc8 is displayed
DFG007
• Open the front right
cover of the ring binder.
• Pull down lever Mc7.
• Fully remove the unit by
pulling on handle Mc8.
• Remove any jammed
paper.
• Return the unit to its
original position.
• Return lever Mc7 to its
original position.
• Remove any bound
booklets that are inside
the machine.
• Close the front right
cover of the ring binder.
• Remove any jammed
bound booklets from
the paper exit.
When Mk1 or Mk2 is displayed
• Open the interposer
and Mk1 covers.
• Open the Mk2 cover,
and then remove
misfed paper.
• Close the Mk2, Mk1, and interposer covers.
• Remove paper if the display reports a paper
jam in Mk3 - Mk5.
CXG010
7. Troubleshooting
248