• Places that are where the machine will be subject to frequent strong vibration
• Places that are where the machine is exposed to dampness or wet weather, such as rain and snow
• Places that are with poor ventilation
• Dusty areas
• Places that are close to machines generating ammonia, such as a diazo copy machine
• Unstable places
• Place the machine on a level spot. The machine must be level within 5 mm, 0.2 inches: both
front to rear and left to right.
Optimum space for locating the machine
Place the machine near the power source, providing the clearance areas shown.
The clearance shown is necessary for using and servicing the machine.
1. Rear: 80 cm (31.5 inches) or more
2. Right: 100 cm (39.4 inches) or more
3. Front: 100 cm (39.4 inches) or more
4. Left: 100 cm (39.4 inches) or more
• For the required space when options are installed, contact your service representative.
Power connection
• Do not use any power sources other than those that match the specifications shown. Doing so
could result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
8. Maintenance
276
To Next Page
Loading...
