Ricoh PX - Basic Setup

25
If you are using the camera for the first time, read this section.
Sleep Mode and Auto Power Off --------------------------------------------------
If no operations are performed for the time selected for the setup menu
(GP.78) [Sleep Mode] (GP.81) or [Auto Power Off ] (GP.81) options, the
picture display will dim or the camera will turn off automatically to save power.
Basic Setup
Setting the Language
A language-selection dialog is displayed
the first time the camera is turned on.
Highlight the desired language and press
the MENU/OK button (to proceed without
selecting a language, press t).
Setting the Date and Time
The dialog shown at right will be displayed;
press # or $ to highlight the year, month,
hour, minute, second, or date format and
press ! or " to change.
Press the MENU/OK button when settings
are complete. A confirmation dialog will
be displayed; press the MENU/OK button
again to set the camera clock.
Note -------------------------------------------------------------------------------------
• To stamp pictures with the time and/or date of recording, select [Date] or
[Date/Time] for [Date Imprint] (GP.73) in the shooting menu (GP.71).
• To retain the date and time settings, load a battery with adequate remaining
power for more than two hours.
• If the battery is removed for more than one week, the date and time settings
will be lost. These settings must be made again.
• The language, date, and time can be changed at any time using the [Language/
N] (GP.82) and [Date Settings] (GP.82) items in the setup menu
(GP.78).