Ricoh PX - Installing Software

90
9
Downloading Images to Your Computer
Caution ---------------------------------------------------------------------------------
• Windows XP 64-bit and Windows Vista 64-bit are not supported.
• If your computer has an upgraded OS, the USB function may not work normally,
so it will not be supported.
• The provided software may not operate properly if changes are made to the
operating system, such as with patches and service package releases.
• The camera does not support connection to a USB port added by using an
extension function (PCI bus or other).
• If used in conjunction with a hub or other USB devices, the software may not
work properly.
• When dealing with movies and other large files, a larger memory environment
is recommended.
Installing Software
Install the supplied software to your computer.
Caution ---------------------------------------------------------------------------------
If you install the DC Software 2 with the DC Software having been already
installed, DL-10 for the DC Software 2 is added to the Start-up folder.
1
Turn the camera power off, and pull the SD memory card
out of the camera.
• With SD memory card in the camera, the software cannot be
installed.
2
Connect the supplied USB cable to the computer.
3
Connect the USB cable to the
common terminal for USB port/
AV output of the camera.
• The camera turns on automatically
when a connection is established.