Ricoh R8 - Setting DPOF for Multiple Still Images

130
Other Playback Functions
3
To make the DPOF settings for selected still images all at once,
follow the steps below.
1 Press the 6 (Playback) button.
2 Turn the zoom lever toward 9 (Thumbnail Display).
• The screen is divided into 20 frames and thumbnails are displayed.
3 Press the ADJ./OK button !"#$ to select the first still
image for which you want to make the DPOF setting.
4 Press the MENU button.
• The Playback menu appears.
5 Press the ADJ./OK button " to
select [DPOF] and press the
button $.
6 Press the button !" to set the
number of copies to print.
• Press the button ! to increase the
number of copies, or press the button
" to decrease the number of copies.
7 Press the button #$ to select the next still image for
which you want to make the DPOF setting.
8 Press the button !" to set the number of copies to print.
• Press the button ! to increase the number of copies, or press the
button " to decrease the number of copies.
9 Repeat Steps 7 and 8 to select all the still images for
which you want to make the DPOF setting.
10 Press the ADJ./OK button.
• The display indicates that the selected images are being processed;
once finished, the display returns to the thumbnail display screen.
Note ----------------------------------------------------------------------------------------------
• To remove the DPOF settings for multiple still images, follow the same steps
described above to set the number of copies to print to [0] for each image, and then
press the ADJ./OK button.
• You can also cancel the DPOF settings for all still images at once. (GP.129)
Setting DPOF for Multiple Still Images