156
Changing Camera Settings
5
3
Press the button !" to select
[Auto Resize].
4
Press the ADJ./OK button.
5
Turn and hold the zoom lever
toward z (Telephoto) until the
maximum magnification is
reached on the zoom bar, then
momentarily release the zoom
lever, and then turn the zoom
lever again toward z.
• Each time you turn the zoom lever
toward z, the image is resized by one setting.
• The size at which the image is recorded is displayed above the zoom
bar.
Caution------------------------------------------------------------------------------------------
This function is not available when shooting in Multi-shot or when scene mode is set to
[Skew Correct Mode]. If [Auto Resize] is set in these situations, the digital zoom is
activated instead.
To Next Page
Loading...
