Ricoh R8 - Changing the Text Density (Scene Mode)

68
Various Shooting Functions
1
If you are shooting with [Text Mode] in Scene Mode (GP.44), you
can use the ADJ./OK button to change the shading of text.
You can select from [Deep], [Normal] and [Light].
1 Turn the mode dial to SCENE.
2 Press the MENU button.
• The scene mode selection screen appears.
3 Press the ADJ./OK button ".
4 Press the button !"#$ to
select [Text Mode] and then
press the ADJ./OK button.
5 Press the ADJ./OK button.
• The text density menu appears.
6 Press the ADJ./OK button !"
to select the desired density
setting.
• You can also press the shutter
release button to take the picture.
7 Press the ADJ./OK button.
• The text density setting does not appear on the screen.
Changing the Text Density (Scene Mode)
To change the setting, use the Shooting menu or the ADJ./OK button. This section explains
easy ways to change the shading setting with the ADJ./OK button.
To use the Shooting menu, see “Using the Menu” (GP.70) and “Shooting Menu Items by
Scene Mode” (GP.197).
Deep
Light
Normal
Ok