48
If you are using the camera for the first time, read this section.
Shooting in Zoom Macro Mode
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
Press the MENU button.
• The scene mode selection screen appears.
3
Press the ADJ./OK button ".
4
Press the
button !"#$
to select [Zoom Macro].
5
Press the ADJ./OK button.
6
Turn the zoom lever toward z (Telephoto) or Z
(Wide-angle).
• The zoom level appears on the picture display.
7
Compose your picture and half-press the shutter
release button.
8
Full-press the shutter release button.
Caution-----------------------------------------------------------------------------------------------
• When using the zoom macro, you can shoot close-ups within the following distances:
• If [Pic Quality/Size] is set to 3648 × 2736 and [Digital Zoom Img] is set to [Auto
Resize], the auto resize zoom is activated. (GP.155)
Approx. 1cm Shooting range: Approx. 22.6 mm × 17 mm
(when digital zoom is not used)
Shooting range: Approx. 4.7 mm × 3.5 mm
(when 4.8× digital zoom is used)
To Next Page
Loading...
