Ricoh R8 - Using the Setup Menu

141
Changing Camera Settings
5
1 Press the MENU button.
• The Shooting menu (or the Playback menu) appears.
2 Press the ADJ./OK button $.
• The Setup menu appears.
• In Scene Mode, pressing the
ADJ./OK button $ twice displays
the Setup menu.
3 Press the ADJ./OK button
!" to select the desired item.
• Press the ADJ./OK button " at the
bottom item to display the next screen.
4 Press the ADJ./OK button $.
• The menu item settings are displayed.
5 Press the ADJ./OK button !"
to select the setting.
6 Press the ADJ./OK button.
• The Setup menu disappears and the
camera is ready for shooting or
playback.
• The Setup menu may appear depending on the setting. In this case,
press the MENU button or the ADJ./OK button to return to the shooting
or playback screen.
• Pressing the ADJ./OK button # in step 6 confirms the setting and the
display returns to the screen shown in step 3.
Using the Setup menu
In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./
OK button” (as in Step 6 below), but you can also confirm the setting and return to the menu
screen by pressing the ADJ./OK button #.
The menu items are
provided on four screens.