Ricoh R8 - Changing the Operation Sound Setting (Operation Sounds)

152
Changing Camera Settings
5
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the operation sound settings, follow the steps below.
1 Display the Setup menu.
• For the operating procedure, see P.141.
2 Press the ADJ./OK button " to select [Operation
Sounds] and press the button $.
3 Press the button !" to select
the desired setting.
4 Press the ADJ./OK button.
Changing the Operation Sound
Setting (Operation Sounds)
Start sound : Sound when the camera is turned on.
Shutter release sound : Sound when the shutter release button is pressed.
Focus sound : Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound : Error sound indicating an operation that cannot be performed.
Available Settings
All (All sounds on) *Default setting
Shutter (Shutter release sound and beep sound only)