Ricoh SP 150w - Installation of Wireless Driver Program in Mac OS System

55
Network Installation
Verify that your printer has been Wi-Fi congured. Then Select Network Installation.
1. Verify that the printer is powered on and Wi-Fi is enabled.
2. Insert the CD-ROM provided with this product into the CD-ROM drive.
3. Select[NetworkInstallation],andreadthelicenseagreementcarefully.Ifyou
acceptthelicenseagreement,checktheboxbesidethe[Ihaveagreed...]state-
ment,andclick[Next].
4. Awindowwillappearpromptingyoutoselectyourprinter.Click[Refresh].
• SP150SUw will appear on the list. Click [Next] and proceed to Step 6.
• If the printer does not appear in the list after refreshing, proceed to Step 5.
5. Click[AddPrinter]andthewindowshownbelowwillpopup.Enter“Port
Name” and “IP Address”, and then follow the instructions on screen. Click
[Next].