EasyManua.ls Logo

Ricoh SP 200 - IPv6 Network Configuration

Ricoh SP 200
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Details
Item Description
Default Gateway
Address
Enter the default gateway address.
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
DNS Server Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
LPR Select to enable network printing using LPR/LPD.
RAW Select to enable network raw printing.
IPP Select to enable network printing using Internet Print Protocol.
Configuring the IPv6 settings
Click [IPv6] to display the page for configuring the IPv6 settings.
In [LAN Type] in [Interface Settings], you can select [Ethernet] to display the wired LAN IP address,
or [Wireless LAN] to display the wireless LAN IP address.
IPv6
Item Description
IPv6 Select whether IPv6 is active or inactive.
4. Configuring the Machine Using Utilities
42

Table of Contents

Other manuals for Ricoh SP 200

Related product manuals