Ricoh SP 200 - Specifications of the Machine; General and Printer Function Specifications

Specifications of the Machine
This section lists the machine's specifications.
General Function Specifications
Configuration
Desktop
Print process
Laser electrostatic transfer
Maximum paper size for printing
216 mm × 356 mm (8.5 × 14 inches)
Warm-up time
Less than 25 seconds (23 °C, 71.6 °F)
Paper sizes
A4, 8
1
/
2
" × 11 " (Letter), 8
1
/
2
" × 14 " (Legal), B5, 5
1
/
2
" × 8
1
/
2
" (Half Letter), 7
1
/
4
" × 10
1
/
2
" (Executive), A5, A6, B6, 16K (197 × 273 mm), 16K (195 × 270 mm), 16K (184 × 260 mm),
Custom Paper Size
• The following paper sizes are supported as custom paper sizes:
• Width
Tray1: Approximately 100-216 mm (3.9-8.5 inches)
Bypass Tray: Approximately 90-216 mm (3.6-8.5 inches)
• Length
Approximately 148-356 mm (5.8-14 inches)
Paper type
Plain Paper (65-99 g/m
2
(17-26 lb.)), Recycled Paper (75-90 g/m
2
(20-24 lb.)), Thin Paper
(52-64 g/m
2
(14-17 lb.)), Thick Paper (100-130 g/m
2
(26.6-34 lb.))
Paper input capacity
• Tray 1
150 sheets (70 g/m
2
, 19 lb.)
• Bypass Tray
1 sheet (70 g/m
2
, 19 lb.)
7. Appendix
74