3. Click [Log in].
4. Enter the administrator password, and then click [Log in].
If you are logging in for the first time, enter "admin133" as the password.
5. In the menu area, select the setting you wish to specify.
6. Specify the machine settings.
7. Click [OK].
The specified settings are transmitted to the machine.
Settings List
This section explains the Web Image Monitor settings.
Checking the System Information
On the top page, you can check the current system information such as the device information, paper
tray status, toner status, and total counter.
Item Description
Status Displays the icon indicating the device status.
Toner Toner level status may not be displayed.
Total Counter Displays the total counter.
Paper Displays the size and type of paper loaded in Tray 1 and the bypass tray.
Configuring the Interface Settings
Click [Interface Settings] to display the page for configuring the interface settings.
Using Web Image Monitor
39
To Next Page
Loading...
