4. If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.
5. Click [OK].
6. On the [User Tool] tab, click [Printer Configuration].
7. On the [Scanner] tab, select the number you want to register, and then click [Modify...].
To delete a destination, select its registration number, and then click [Delete].
8. Modify the destination, and then click [OK].
To delete a destination, and then click [Yes].
9. Click [Apply].
10. Click [OK].
11. Click [Close].
5. Scanning Originals
64
To Next Page
Loading...
