System Settings
Tray 1 Ppr Settings
Paper Size
Specifies the paper size.
Default: [A4]
• A4, B5 JIS, A5, B6 JIS, A6, LG (8 1/2 x 14),LT (8 1/2 x 11), HLT (5 1/2 x 8 1/2),
EXE (7 1/4x10 1/2), 16K (197x273mm), 16K (195x270mm), 16K (184x260mm),
Custom
Paper Type
Specifies the paper type.
Default: [Plain Paper]
• Plain Paper, Recycled Paper, Thick Paper, Thin Paper
Adjust Sound Volume
Specifies the volume of the sounds produced by the machine.
Select the setting for each item from [Off], [Low], [Middle], or [High].
Panel Key Sound
Specifies the volume of the beep sound when a key is pressed.
Default: [Middle]
Alarm Volume
Specifies the volume of the alarm sound when an operation error occurs.
Default: [Middle]
On Hook Mode
Specifies the volume of the sound from the speaker during On Hook mode.
Default: [Middle]
Copy Job End Tone
Specifies the volume of the beep sound when a copy job is complete.
Default: [Off]
Copy Job Error Tone
Specifies the volume of the beep sound when a copy job error occurs.
Default: [Middle]
Print Job End Tone
Specifies the volume of the beep sound when a print job is complete.
Default: [Off]
System Settings
111
To Next Page
Loading...
