Ricoh SP 200S - Specifying Combine for Copying

CES036
• Landscape: L to R
CES037
• Landscape: T to B
CES038
Specifying Combine for Copying
1. Press the [ ] key.
CTT101
On a Type 4 model, press the [ ] key. If ID card copy mode is being displayed,
press the [ ] key again to switch to normal copier mode.
2. Press the [ ] or [ ] key in the standby mode screen to select [Combine], and then press
the [OK] key.
3. Press the [ ] or [ ] key to select [2 on 1] or [4 on 1], and then press the [OK] key.
Combining Multiple Pages
51