2-21
Confidential
Error
Codes
Description
Refer
to:
Error
Codes
Description
Refer
to:
BF00
The document scanning position
sensor detected that the document
length was 400 mm or longer and
could not be fed to ADF (double-side
restoration).
2-54
ED00 ---
C001 --- EE00 ---
C002 --- F900
The spec code was not entered
correctly.
2-55
C003 --- FA01 ---
C004 --- FA02 ---
C100 --- FA03 ---
C700
The memory is insufficient to expand
the data of PC-Print.
2-54 FB01 ---
C800
The memory used to store secure print
data exceeded the memory size for
secure print data.
2-54 FB02 ---
C900 --- FB03 ---
CA00 --- FB04 ---
D100
An error occurred while initializing the
modem.
2-54 FB05 ---
D200
Detected that the modem PCB is not
connected.
2-54 FB06 ---
D800 --- FB07 ---
D900 --- FB08 ---
DA00 --- FB09 ---
DB00 --- FB0A ---
E000
An error occurred in the ROM check
sum.
2-54 FB0B ---
E001 --- FB0C ---
E002 --- FB0D ---
E100 Program error 2-54 FB0E ---
E400 --- FB0F ---
E500
An error occurred during access to the
DRAM in the main PCB ASSY.
2-55 FC01 ---
E600
Write error in the EEPROM of the main
PCB ASSY
2-55 FC02 ---
E701 System error in the flash ROM 2-55 FC03 ---
E702 Read error in the flash ROM 2-55 FC04 ---
E900 --- FC05 ---
EC00 ---
To Next Page
Loading...
