5.System Maintenance
106
[-8 to 8 / 0 (Default) / 1mm/step]
[-8 to 8 / 0 (Default) / 1mm/step]
[-8 to 8 / 0 (Default) / 1mm/step]
Output check (Main motor)
Output check (Relay clutch)
Output check (Paper feed clutch)
Output check (By-pass feed solenoid)
Output check (Registration clutch)
Output check (Cooling fan high speed)
Output check (Cooling fan low speed)
Output check (Quenching lamp)
Output check (Polygon mirror motor)
Output check (Duplex motor normal)
Output check (Duplex motor reverse)
Sets whether to display an alert when each EM parts yield of this
machine is reached.
[On or Off (Default)]
Resets the engine settings stored in the EEPROM to factory
default.
Displays the total counter (Engine).
Displays the EM counter (Transfer Roller: Time).
Paper Feed
Roller –
Pages
Displays the EM counter (Paper Feed Roller: pages).
Displays the EM counter (Fusing Unit: time).