Ricoh SP 330DN - Page 158

5.System Maintenance
146
Group
Item
Remarks
Paper
Amount of Paper Buckle at the
Registration Roller: Duplex Tray
Vertical: Plain
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thick
Paper
[-8 to 8 / 0* / 1 mm/step]
Vertical: Thin
Paper
[-8 to 8 / 0* / 1 mm/step]
Fusing Temperature
Plain Paper
Adjusts the fusing temperature for each paper
type.
[150 to 200 / 175* / 1°C/step]
Thick Paper 1
[170 to 200 / 185* / 1°C/step]
Thin Paper
[155 to 180 / 170* / 1°C/step]
Envelope
[170 to 200 / 185* / 1°C/step]
Thick Paper 2
[175 to 200 / 185* / 1°C/step]
Recycled
[160 to 180 / 170* / 1°C/step]
Standby
Mode
[120 to 175 / 155* / 1°C/step]
Low Power
Mode
[80 to 135 / 120* / 1°C/step]
SC559 Detection
[On or Off *]
Print Test Pattern
Prints the test pattern.
Refill Mode Setting
[Auto refill mode */ Pure refill mode]
DFU
Handling Mode on "Waste Toner full" of the refilled
AIO
Sets the machine operation at "waste toner
full" of the refilled AIO.
[On or Off *]
Jam Counter
Displays Jam Counter for each location.
Total Jam, Tray 1 Jam, Tray 2 Jam, Bypass
Tray Jam, Duplex Jam, Inner Jam, Outer Jam
*: Default