3.Setting for PaaS (Only for CHN)
20
Enter the customer Contract ID.
Enter the customer Authentication Key.
China: rpaasdev.online.tj.cn
If no NPB URL is specified, enter the PaaS URL above.
6. If using a proxy server, enter the proxy information.
Proxy Function List:
Check this box to enable the proxy server.
Set the proxy server address.
The characters that can be input are: 0-9, A-Z, a-z.
Enter the proxy server port number.
The range is 1-65535.
The authorization method of linking to the proxy server.
The options are:
-None
-Basic
-Digest
The default value is “None”.
When “Basic” or “Digest” is selected, the User Name and Password can be
edited and should not be left blank.
When “None” is selected, the User Name and Password are read only.
The account connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
The password for the user name connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
7. After entering the information, click [OK].
8. If the message “Operation Successful” appears, PaaS registration is complete. For other
messages, check the following list table:
PaaS Error Message List: